Pure Sine Wave 2kw UK Socket PV Power Inverter

Pure Sine Wave 2kw UK Socket PV Power Inverter

Description of the Inverter:

It allows you to power up multiple loads

such as office equipments and major household appliances from your recreational vehicle (RV).

It is our newly designed model, owns LED Intelligent digital display and remote Switch, it provides household power on the go!

It converts battery power DC 12V/24V/48VDC to AC 100/110/120/220/230/240V household power.

The E-display shows power on, battery connected, battery level, battery voltage&AC output voltage,

frequency, output load percent, inverter normal working, inverter under protection, inverter low voltage protection,

inverter over voltage protection, inverter overload protection, inverter over temperature protection.

FAQ:

1.How far can I keep my inverter from my batteries?

Keep the cables between your inverter and batteries as short as possible. This will help your batteries perform their best and keep the inverter's signal clean. The cables that come with the inverter are "rated" or good for up to six ft. If you plan for going over six ft., drop down to a larger gauge cable. Please call us if you are still unsure. This is pretty important stuff that should not be overlooked. If the cables between your battery and inverter get hot while under heavy load, then you should use heavier cables.

2.Amp hours of Battery - what are they?

All deep cycle batteries are rated in amp-hours. An amp-hour is one amp for one hour, or 10 amps for 1/10 of an hour and so forth. It is amps x hours. If you have something that pulls 20 amps, and you use it for 20 minutes, then the amp-hours used would be 20 (amps) x 0.333 (hours), or 6.67 AH. The accepted AH rating time period for batteries used in solar electric and backup power systems (and for nearly all deep cycle batteries) is the "20 hour rate". This means that it is discharged down to 10.5 volts over a 20 hour period while the total actual amp-hours it supplies is measured. Sometimes ratings at the 6 hour rate and 100 hour rate are also given for comparison and for different applications. The 6-hour rate is often used for industrial batteries, as that is a typical daily duty cycle. Sometimes the 100 hour rate is given just to make the battery look better than it really is, but it is also useful for figuring battery capacity for long-term backup amp-hour requirements.

Product Specification:

Factory Display:

Certificates: